RADIO RECEIVER INSTALLATION

Click here

PROCEDURE

1. Click here

   PRECAUTION (w/ Multi-display)

   Note:

   When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. Click here

   INSTALL RADIO RECEIVER ASSEMBLY (w/o Multi-display)

3. Click here

   INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY (w/ Multi-display)

4. Click here

   INSTALL HARD DISK DRIVE (w/ Multi-display)

   Click here

5. Click here

   INSTALL NO. 2 RADIO BRACKET (w/o Multi-display)

   
   

   1. Install the No. 2 radio bracket with the 4 screws.

6. Click here

   INSTALL NO. 2 RADIO BRACKET (w/ Multi-display)

   Click here

7. Click here

   INSTALL NO. 1 RADIO BRACKET (w/o Multi-display)

   
   

   1. Install the No. 1 radio bracket with the 4 screws.

8. Click here

   INSTALL NO. 1 RADIO BRACKET (w/ Multi-display)

   Click here

9. Click here

   INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Multi-display)

   
   

   1. Connect each connector.

   2. Engage the 2 clips and 2 claws to temporarily install the radio receiver assembly with bracket.

   3. Install the radio receiver assembly with bracket with the 4 bolts.

10. Click here

    INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (w/ Multi-display)

    Click here

11. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

12. Click here

    INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

13. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

14. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

15. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Multi-display)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

16. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Multi-display)

    Click here

17. Click here

    INSPECT HARD DISK DRIVE (w/ Multi-display)

    (Click here)

18. Click here

    PERFORM MULTI-MEDIA MODULE RECEIVER ASSEMBLY INITIALIZATION (w/ Parking Assist Monitor System)

    Tip:

    When replacing the multi-media module receiver assembly, perform parking assist monitor system initialization (Click here).

19. Click here

    CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here