RADIO RECEIVER REMOVAL

PROCEDURE


  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Click here

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A00097W

      Remove the 4 bolts.

    2. A0004DM

      Pull the radio receiver assembly with bracket toward the rear of the vehicle and disengage the 2 clips and 2 claws.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  7. REMOVE NO. 1 RADIO BRACKET


    1. A00057U

      Remove the 4 screws and No. 1 radio bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. A0008UY

      Remove the 4 screws and No. 2 radio bracket.

  9. REMOVE RADIO RECEIVER ASSEMBLY