Click here

AUDIO AND VISUAL SYSTEM(w/o Multi-display) Portable Player cannot be Connected Manually/Automatically

Click here
Click here
DTC Code DTC Name
  Portable Player cannot be Connected Manually/Automatically
Click here

CAUTION / NOTICE / HINT

Tip:

Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the radio receiver assembly, even if the portable audio player itself can play files (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK CONNECTED DEVICE SETTINGS


    1. Check if the portable player is registered as a connected device.

      Note:

      If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

      Result
      Result Proceed to
      The portable player is registered as a connected device. A
      The portable player is not registered as a connected device. B

    • AClick here
    • B

      REGISTER PORTABLE PLAYER AS CONNECTED DEVICE

  2. Click here

    CHECK SYMPTOMS


    1. Check the connection condition between the portable player and radio receiver assembly.

      Tip: The portable player cannot be connected under any of the following conditions:

      • The portable player is connected to another device.

      • The radio receiver assembly has cleared the portable player registration.

      • The portable player is off.

      Result
      Result Proceed to
      The portable player cannot be connected automatically. A
      The portable player cannot be connected manually. B

  3. Click here

    CHECK AUTOMATIC CONNECTION SETTINGS


    1. Check the automatic connection settings of the "Bluetooth" audio.


      1. Turn the power switch off.

      2. Turn the power switch on (ACC) or (IG).

        OK
        The portable player is automatically recognized by the radio receiver assembly.

    • OKClick here
    • NG

      CHANGE SETTING TO ALLOW PORTABLE PLAYER TO BE RECOGNIZED BY RADIO RECEIVER ASSEMBLY

  4. Click here

    CHECK PORTABLE PLAYER STATUS


    1. Check the status of the portable player.


      1. Check that the portable player is not in standby mode.

      2. Check that the portable player is not connected to another device (headphones etc.).

        OK
        The portable player is not in standby mode and not connected to another device (headphones etc.).

    • OKClick here
    • NG

      TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)

  5. Click here

    CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL


    1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

      OK
      The portable player can be connected manually/automatically.

    • OKClick here
    • NG

      PORTABLE PLAYER IS NOT COMPATIBLE

  6. Click here

    REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES


    1. Remove additional devices which use radio waves.

    2. Check if the portable player can be connected manually/automatically.

      OK
      The portable player can be connected manually/automatically.

    • OK

      END

    • NG

      PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)