AUDIO AND VISUAL SYSTEM(w/o Multi-display) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

PROCEDURE

1. Click here

   CHECK IF A PROPER CD IS INSERTED

   
   

   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      CD is normal.

      Tip:
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   
   
   • OKClick here
   • NG

     CD IS FAULTY

2. Click here

   CHECK THAT CD IS INSERTED PROPERLY

   
   

   1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

   
   
   • OKClick here
   • NG

     INSERT CD PROPERLY

3. Click here

   CLEAN CD AND RECHECK

   
   

   1. CD cleaning.

      
      
      1. 

         If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.

         OK
         Malfunction disappears.

         Note:

         Do not use a conventional record cleaner or anti-static preservative.

   
   
   • OK

     END

   • NGClick here
4. Click here

   REPLACE CD AND RECHECK

   
   

   1. Replace the CD with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   
   • OK

     END

   • NG

     REPLACE RADIO RECEIVER ASSEMBLY (Click here)