Click here

AUDIO AND VISUAL SYSTEM(w/ Multi-display) Illumination for Panel Switch does not Come on with Tail Switch ON

Click here
Click here
DTC Code DTC Name
  Illumination for Panel Switch does not Come on with Tail Switch ON
Click here

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. A0007GW

      Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head ON
      Off OFF
      Tip:

      This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.


    • OK

      REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)

    • NG

      PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)