AUDIO AND VISUAL SYSTEM(w/ Multi-display), Diagnostic DTC:B1585

DTC Code DTC Name
B1585 USB Device Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in a connected device.

DTC No. DTC Detection Condition Trouble Area
B1585

USB Device Malfunction


  • A non mass-storage class or incompatible protocol USB device connected

  • USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT) connected

  • "iPod" malfunction

  • "iPod" with unsupported firmware connected

  • Unsupported "iPod" model connected


  • USB device or "iPod"

  • Multi-media module receiver assembly

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System Click here.

PROCEDURE


  1. REPLACE USB DEVICE OR "iPod"


    1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

    2. Turn the power switch off.

      Tech Tips

      When this DTC has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.

    3. Turn the power switch on (ACC).

    4. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

      Tech Tips


      • If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

      • Refer to System Description for compatible formats and versions Click here.


    NEXT
  2. CHECK DTC


    1. Clear the DTCs Click here.

    2. Recheck for DTCs and check that no DTCs are output.

      Tech Tips

      If DTCs are detected frequently, replace the multi-media module receiver assembly.

      OK
      No DTCs are output.

    OK
    NG