AUDIO AND VISUAL SYSTEM(except 8 Speakers) Disc cannot be Inserted or is Ejected Right After Insertion

PROCEDURE

1. Click here

   CHECK IF A PROPER DISC IS INSERTED

   
   

   1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      Disc is normal.

      Tip:
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to Owner's Manual.

      Result
      Proceed to OK NG

   
   
   • OKClick here
   • NG

     END (DISC IS FAULTY)

2. Click here

   CHECK THAT DISC IS INSERTED PROPERLY

   
   

   1. Check whether or not the disc is inserted upside down.

      OK
      Disc is properly inserted.

      Result
      Proceed to OK NG

   
   
   • OKClick here
   • NG

     INSERT DISC PROPERLY

3. Click here

   CLEAN DISC AND RECHECK

   
   
   1. 

      Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

      Result
      Proceed to OK NG

   
   
   • OK

     END (DISC WAS DIRTY)

   • NGClick here
4. Click here

   REPLACE DISC AND RECHECK

   
   

   1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

      Result
      Proceed to OK NG

   
   
   • OK

     END (DISC WAS FAULTY)

   • NG

     REPLACE RADIO RECEIVER ASSEMBLYClick here