| DTC Code | DTC Name |
|---|---|
| B15C0 | GPS Antenna Connection Malfunction(short) |
| B15C1 | GPS Antenna Connection Malfunction(break) |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C0 | GPS Antenna Connection Malfunction(short) | Navigation antenna assembly error |
|
| B15C1 | GPS Antenna Connection Malfunction(break) | Navigation antenna assembly power source malfunction |
|
CAUTION / NOTICE / HINT
Note
Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections before performing the following inspection procedure.
PROCEDURE
CHECK DTC
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
INSPECT NAVIGATION ANTENNA ASSEMBLY
Remove the navigation antenna assembly.
| *a | Component without harness connected (Navigation Antenna Assembly) |
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||
|---|---|---|---|---|---|---|
|
| Result | |||
|---|---|---|---|
|
| OK |
|
REPLACE RADIO RECEIVER ASSEMBLY Click here |
| NG |
|
REPLACE NAVIGATION ANTENNA ASSEMBLY Click here |