Click here

AUDIO AND VISUAL SYSTEM(for 8 Speakers) TERMINALS OF ECU

Click here
Click here
Tip:

Check from the rear of the connector while it is connected to the components.


Click here
  1. A0005U7E01

    RADIO RECEIVER ASSEMBLY

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    H177-11 (CA+) - H177-23 (CGND) B - W-B Television camera power supply Power switch on (ACC) 5.5 to 7.05 V
    H177-12 (V+) - H177-23 (CGND) R - W-B Video signal

    Power switch on (READY)

    Shift lever in R

    Camera lens not covered, displaying an image

    Pulse generation (Refer to waveform 1)

    Power switch on (READY)

    Shift lever in R

    Camera lens covered, blacking out screen

    Pulse generation (Refer to waveform 2)
    H177-18 (TX2+) B AVC-LAN communication signal - -
    H177-19 (TX2-) W AVC-LAN communication signal - -
    H177-23 (CGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    H177-24 (V-) - H177-23 (CGND) R - W-B Ground Always Below 1 V
    H179-1 (FR+) - H179-7 (GND1) G - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H179-2 (FL+) - H179-7 (GND1) W - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H179-3 (ACC1) - H179-7 (GND1) Y - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
    H179-4 (+B1) - H179-7 (GND1) R - W-B Power source (+B) Power switch off 11 to 14 V
    H179-5 (FR-) - H179-7 (GND1) R - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H179-6 (FL-) - H179-7 (GND1) B - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H179-7 (GND1) - Body ground W-B - Body ground Ground Always Below 1 V
    H179-10 (ILL+) - H179-7 (GND1) G - W-B Illumination signal Light control switch off Below 1 V

    Power switch off

    Light control switch in tail or head position

    11 to 14 V
    H180-2 (RL+) - H179-7 (GND1) G - W-B Sound signal (rear left) Audio system playing A waveform synchronized with sound signals is output
    H180-5 (ILL-) - H179-7 (GND1) B - W-B Illumination signal Light control switch off Below 1 V
    Light control switch in tail or head position Pulse generation
    H180-6 (RL-) - H179-7 (GND1) R - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
    H176-1 (IG) - H179-7 (GND1) V - W-B Power source (IG) Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    H176-4 (MACC) - H179-7 (GND1) R - W-B Microphone power supply Power switch off Below 1 V
    Power switch on (ACC) 4.75 to 5.25 V
    H176-5 (MIN+) - H179-7 (GND1) W - W-B Microphone voice signal

    See "Check Microphone" in Operation Check (Click here)

    -
    H176-6 (SNS2) - H179-7 (GND1) V - W-B Microphone connection detection signal Always Below 1 V
    H176-7 (TX1+) R AVC-LAN communication signal - -
    H176-8 (TX1-) BR AVC-LAN communication signal - -
    H176-9 (CANH) R CAN communication signal - -
    H176-10 (CANL) W CAN communication signal - -
    H176-11 (AGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    H176-12 (SG) - H179-7 (GND1) Shield - W-B External device connection detection signal External device connected Below 1 V
    H176-13 (VV+) - H179-7 (GND1) B - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with video signals is output
    H176-14 (VV-) - H179-7 (GND1) W - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with video signals is output
    H176-15 (PKB) - H179-7 (GND1) G - W-B Parking brake signal

    See "Check Vehicle Signal" in Operation Check (Click here)

    -
    H176-16 (MUT1) - H179-7 (GND1) B - W-B Mute signal Power switch on (ACC) Audio system playing 2.0 V or higher
    Audio system changing modes Below 1 V
    H176-17 (SPD) - H179-7 (GND1) V - W-B Vehicle speed signal

    See "Check Vehicle Signal" in Operation Check (Click here)

    -
    H176-18 (SGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    H176-19 (MIN-) - H179-7 (GND1) B - W-B Microphone voice signal

    See "Check Microphone" in Operation Check (Click here)

    -
    H176-21 (SW1) - H176-23 (SWG) L - W Steering pad switch signal No switch pushed 2.97 to 3.56 V
    Seek+ switch pushed 0.27 to 0.35 V
    Seek- switch pushed 0.86 to 1.03 V
    Volume+ switch pushed 1.51 to 1.79 V
    Volume- switch pushed 2.22 to 2.66 V
    H176-22 (SW2) - H176-23 (SWG) R - W Steering pad switch signal No switch pushed 2.97 to 3.56 V
    MODE switch pushed 0.27 to 0.35 V
    On hook switch pushed 0.86 to 1.03 V
    Off hook switch pushed 1.51 to 1.79 V
    Voice switch pushed 2.22 to 2.66 V
    H176-23 (SWG) - H179-7 (GND1) Y - W-B Steering pad switch ground Always Below 1 V
    H176-25 (ADPG) - H179-7 (GND1) BR - W-B External device connection detection signal External device connected Below 1 V
    External device not connected 2.1 to 3 V
    H176-26 (VAR+) - H176-27 (VA-) R - B Sound signal (right) External device playing (When stereo jack used) A waveform synchronized with sound signals is output
    H176-27 (VA-) - H179-7 (GND1) B - W-B Ground Always Below 1 V
    H176-28 (VAL+) - H176-27 (VA-) W - B Sound signal (left) External device playing (When stereo jack used) A waveform synchronized with sound signals is output
    H178-1 (VMTF) - H179-7 (GND1) L - W-B Visual mute signal Power switch on (ACC) Screen display changes

    2.0 V or higher

    → Below 1 V

    → 2.0 V or higher

    H178-11 (TX4+) P AVC-LAN communication signal - -
    H178-12 (TX4-) V AVC-LAN communication signal - -
    H182-3 (ACC2) - H169-7 (GND1) V - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
    H182-4 (+B2) - H169-7 (GND1) P - W-B Power source (+B) Power switch off 11 to 14 V
    H182-8 (GND2) - Body ground Y - Body ground Ground Always Below 1 V
    H186-1 (USV1) - Power source - -
    H186-2 (US1-) - Data signal - -
    H186-3 (US1+) - Data signal - -
    H186-4 (UGD1) - Ground - -
    H186-5 (USG1) - Shield ground - -
    H190-1 (GVIF) B Video signal (Digital) - -
    RA-5 (ANT+) - H179-7 (GND1) - - W-B Power source of antenna

    Power switch on (ACC)

    Radio switch on and FM or AM selected

    11 to 14 V

    1. Reference (Oscilloscope waveform):


      1. A00088PE49

        Waveform 1 (camera lens not covered, displaying an image)

        Item Content
        Measurement terminal H177-12 (V+) - H177-23 (CGND)
        Measurement setting 200 mV/DIV., 50 μs./DIV.
        Condition Power switch on (READY), shift lever in R
        Tip:
        • The video waveform changes according to the image sent by the rear television camera assembly.

        • The video waveform is constantly output when the power switch is on (ACC).

        Table 1. Text in Illustration
        *a Waveform 1 (camera lens not covered, displaying an image)
        *b Synchronization Signal
        *c Video Waveform
      2. A0005Z4E16

        Waveform 2 (camera lens covered, blacking out the screen)

        Item Content
        Measurement terminal H177-12 (V+) - H177-23 (CGND)
        Measurement setting 200 mV/DIV., 50 μs./DIV.
        Condition Power switch on (READY), shift lever in R
        Tip:
        • The video waveform changes according to the image sent by the rear television camera assembly.

        • The video waveform is constantly output when the power switch is on (ACC).

        Table 2. Text in Illustration
        *a Waveform 2 (camera lens covered, blacking out the screen)
        *b Synchronization Signal
        *c Video Waveform
  2. A00065AE03

    STEREO COMPONENT AMPLIFIER ASSEMBLY

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    H88-1 (+B) - H88-3 (GND) Y - W-B Power source (+B) Power switch off 11 to 14 V
    H88-3 (GND) - Body ground BR - Body ground Ground Always Below 1 V
    H88-4 (WFL+) - H88-3 (GND) R - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H88-5 (WFR+) - H88-3 (GND) B - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H88-6 (WF1+) - H88-3 (GND) L - W-B Sound signal (woofer) Audio system playing A waveform synchronized with sound signals is output
    H88-7 (CTR+) - H88-3 (GND) B - W-B Sound signal (front center) Audio system playing A waveform synchronized with sound signals is output
    H88-12 (FL+) - H88-3 (GND) R - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H88-13 (FR+) - H88-3 (GND) B - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H88-14 (RL+) - H88-3 (GND) R - W-B Sound signal (rear left) Audio system playing A waveform synchronized with sound signals is output
    H88-15 (RR+) - H88-3 (GND) V - W-B Sound signal (rear right) Audio system playing A waveform synchronized with sound signals is output
    H88-16 (+B2) - H88-3 (GND) L - W-B Power source (+B) Power switch off 11 to 14 V
    H88-18 (GND2) - Body ground BR - Body ground Ground Always Below 1 V
    H88-19 (WFL-) - H88-3 (GND) W - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H88-20 (WFR-) - H88-3 (GND) Y - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H88-21 (WF1-) - H88-3 (GND) LG - W-B Sound signal (woofer) Audio system playing A waveform synchronized with sound signals is output
    H88-22 (CTR-) - H88-3 (GND) Y - W-B Sound signal (front center) Audio system playing A waveform synchronized with sound signals is output
    H88-27 (FL-) - H88-3 (GND) W - W-B Sound signal (front left) Audio system playing A waveform synchronized with sound signals is output
    H88-28 (FR-) - H88-3 (GND) Y - W-B Sound signal (front right) Audio system playing A waveform synchronized with sound signals is output
    H88-29 (RL-) - H88-3 (GND) W - W-B Sound signal (rear left) Audio system playing A waveform synchronized with sound signals is output
    H88-30 (RR-) - H88-3 (GND) P - W-B Sound signal (rear right) Audio system playing A waveform synchronized with sound signals is output
    H87-1 (MUTE) - H88-3 (GND) Y - W-B Mute signal

    Power switch on (ACC)

    Audio system playing

    2.0 V or higher
    Audio system changing modes Below 1 V
    H87-2 (L-) - H88-3 (GND) B - W-B Sound signal (left) Audio system playing A waveform synchronized with sound signals is output
    H87-3 (L+) - H88-3 (GND) R - W-B Sound signal (left) Audio system playing A waveform synchronized with sound signals is output
    H87-4 (R-) - H88-3 (GND) G - W-B Sound signal (right) Audio system playing A waveform synchronized with sound signals is output
    H87-5 (R+) - H88-3 (GND) W - W-B Sound signal (right) Audio system playing A waveform synchronized with sound signals is output
    H87-6 (SLD) - Body ground Shield - Body ground Shield ground Always Below 1 V
    H87-7 (TX-) BR AVC-LAN communication signal - -
    H87-8 (TX+) R AVC-LAN communication signal - -
    H87-11 (SPD) - H88-3 (GND) V - W-B Vehicle speed signal Power switch on (IG) Wheel being rotated Pulse generation
    H87-12 (ACC) - H88-3 (GND) GR - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
    H87-14 (II1-) - H88-3 (GND) R - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
    H87-15 (II1+) - H88-3 (GND) G - W-B Voice signal Voice guidance sounding A waveform synchronized with voice signals is output
    H87-18 (SLD1) - Body ground Shield - Body ground Shield ground Always Below 1 V
  3. A0009DXE02

    MULTI-DISPLAY ASSEMBLY

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    H93-2 (ILL) - H170-13 (GND1) SB - W-B Illumination signal Light control switch off Below 1 V

    Power switch off

    Light control switch in tail or head position

    11 to 14 V
    H93-6 (TX1+) P AVC-LAN communication signal - -
    H93-7 (TX+) P AVC-LAN communication signal - -
    H93-11 (VMTI) - H93-13 (GND1) L - W-B Visual mute signal

    Power switch on (ACC)

    Screen display changes

    2.0 V or higher

    → Below 1 V

    → 2.0 V or higher

    H93-12 (B) - H93-13 (GND1) R - W-B Power source (+B) Power switch off 11 to 14 V
    H93-13 (GND1) - Body ground W-B - Body ground Ground Always Below 1 V
    H93-18 (TX1-) G AVC-LAN communication signal - -
    H93-19 (TX-) G AVC-LAN communication signal - -
    H93-24 (ACC) - H93-13 (GND1) Y - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
    H161-1 (GVIF) B Video signal (Digital) - -
  4. A0008L6E02

    REMOTE OPERATION BOARD

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    H181-1 (ILL+) - H181-4 (GND) G - W-B Illumination signal Light control switch off Below 1 V

    Power switch off

    Light control switch in tail or head position

    11 to 14 V
    H181-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 V
    H181-8 (ILL-) - H181-4 (GND) GR - W-B Illumination signal Light control switch off Below 1 V
    Light control switch in tail or head position Pulse generation
    H181-10 (TX+) W AVC-LAN communication signal - -
    H181-11 (TX-) V AVC-LAN communication signal - -
    H181-14 (ACC) - H181-4 (GND) Y - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
  5. A0004P6E02

    REAR CONTROL SWITCH (w/ Rear Control Switch)

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    j2-1 (+B) - j2-16 (GND) R - W-B Power source (+B) Power switch off 11 to 14 V
    j2-5 (TX-) W AVC-LAN communication signal - -
    j2-6 (ACC) - j2-16 (GND) P - W-B Power source (ACC) Power switch off Below 1 V
    Power switch on (ACC) 11 to 14 V
    j2-7 (IG+) - j2-16 (GND) SB - W-B Power source (IG) Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    j2-15 (TX+) L AVC-LAN communication signal - -
    j2-16 (GND) - Body ground W-B - Body ground Ground Always Below 1 V