STEERING WHEEL INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)

   Click here

2. INSTALL LOWER STEERING WHEEL BOSS COVER

   
   

   1. Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.

      Note

      Do not allow the steering heater wire harness to be caught between the lower steering wheel boss cover and the steering wheel sub-assembly.

   2. w/ Steering Heater:

      
      

      1. Remove the release paper from new double-sided tape and install the steering heater harness to the lower steering wheel boss cover.

         Note

         Do not touch the adhesive surface of the double-sided tape.

      2. Connect the connector to the steering wheel heater control assembly.

3. INSTALL STEERING SHAKE DAMPER

   
   

   1. Install the steering shake damper to the steering wheel sub-assembly with the 2 screws.

      Torque:

      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

4. INSTALL CRUISE CONTROL SWITCH WIRE

   
   

   1. Install the cruise control switch wire.

5. INSTALL CRUISE CONTROL MAIN SWITCH

   Click here

6. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

7. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

8. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   Click here

9. INSTALL STEERING WHEEL ASSEMBLY

   
   

   1. 

      Text in Illustration

      *a

      Matchmark

      Install the steering wheel assembly aligning the matchmarks on the steering wheel assembly and steering main shaft.

   2. Install the steering wheel assembly set nut.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

   3. w/ Steering Heater:

      
      

      1. 

         Connect the connector.

   4. Connect the connectors to the spiral cable sub-assembly.

10. CHECK STEERING WHEEL CENTER POINT

11. INSTALL HORN BUTTON ASSEMBLY

    Click here