FREEZE FRAME DATA
Note
Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
Turn the power switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the GTS.
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Check the freeze frame data on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Meter Vehicle Velocity | Vehicle speed from speedometer/ Min.: 0.0 km/h (0.0 MPH) Max.: 300.0 km/h (186.4 MPH) |
0 km/h (0 MPH) | Power switch on (READY) and vehicle stopped |
| No significant fluctuation | Power switch on (READY) and vehicle driven at a constant speed | ||
| Motor Actual Current | Current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left |
Power switch on (READY) and steering wheel being turned |
| Command Value Current | Requested current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left |
Power switch on (READY) and steering wheel being turned |
| Steering Angle Velocity | Steering angle speed/ Min.: -32768 deg/s Max.: 32767 deg/s |
Value changes in proportion to steering speed - The value increases when turning left and decreases when turning right |
Power switch on (READY) and steering wheel being turned |
| Thermistor Temperature | ECU substrate temperature/ Min.: -50.0°C (-58.0°F) Max.: 150.0°C (302.0°F) |
-50°C to 150°C (-58°F to 302°F) | - |
| PIG Power Supply | Power source voltage to active motor/ Min.: 0.0000 V Max.: 20.1531 V |
9 to 16 V | Always |
| IG Power Supply | IG power source voltage/ Min.: 0.0000 V Max.: 20.1531 V |
8 to 16 V | Power switch on (IG) |
| Steering Wheel Torque | Steering wheel torque/ Min.: -327.68 Nm Max.: 7.00 Nm |
Value changes in proportion to steering effort - The value increases when turning left and decreases when turning right |
Power switch on (READY) and steering wheel being turned |
| Motor Rotation Angle | Motor rotation angle/ Min.: 0.000 deg Max.: 1441.770 deg |
During steering operation, motor rotation angle value changes from 0 to 360° | Power switch on (READY) and steering wheel being turned |
| Command Val Current 2 | Requested current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort - The value increases when turning left and decreases when turning right |
Power switch on (READY) and steering wheel being turned |
| Motor Voltage | Motor power supply voltage/ Min.: 0.000 V Max.: 98.000 V |
9 to 16 V | Always |
| Motor Terminal Volt (U) | Motor terminal voltage (U phase)/ Min.: 0.000 V Max.: 98.000 V |
Value changes within 4 to 16 V range | Power switch on (READY) and steering wheel being turned |
| Motor Terminal Volt (V) | Motor terminal voltage (V phase)/ Min.: 0.000 V Max.: 98.000 V |
Value changes within 4 to 16 V range | Power switch on (READY) and steering wheel being turned |
| Motor Terminal Volt (W) | Motor terminal voltage (W phase)/ Min.: 0.000 V Max.: 98.000 V |
Value changes within 4 to 16 V range | Power switch on (READY) and steering wheel being turned |
| Torque Sensor 1 Output | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Power switch on (READY) and steering wheel not being turned (without load) |
| 2.5 to 3.8 V | Power switch on (READY) and steering wheel being turned to the right with vehicle stopped | ||
| 1.2 to 2.5 V | Power switch on (READY) and steering wheel being turned to the left with vehicle stopped | ||
| Torque Sensor 2 Output | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V |
2.3 to 2.7 V | Power switch on (READY) and steering wheel not being turned (without load) |
| 1.2 to 2.5 V | Power switch on (READY) and steering wheel being turned to the right with vehicle stopped | ||
| 2.5 to 3.8 V | Power switch on (READY) and steering wheel being turned to the left with vehicle stopped | ||
| TRQ1 Zero Point Value | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V |
Values differ depending on vehicle | Power switch on (READY) and steering wheel not being turned |
| TRQ2 Zero Point Value | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V |
Values differ depending on vehicle | Power switch on (READY) and steering wheel not being turned |
| PS Assist Signal | Power steering assist signal/ OFF or ON |
OFF | Power switch on (IG) |
| ON | Power switch on (READY) | ||
| Ready Status | Ready status/ OFF or Ready |
OFF or Ready | - |
| Motor Actual Current 2 | Current to motor/ Min.: -327.68 A Max.: 327.67 A |
Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left |
Power switch on (READY) and steering wheel being turned |