POWER STEERING ECU(for Manual Tilt and Manual Telescopic Steering Column) INSTALLATION

PROCEDURE

1. INSTALL POWER STEERING ECU WITH MOTOR ASSEMBLY

   Click here

2. CONNECT ECU WIRE SUB-ASSEMBLY

   
   

   1. Connect the 2 connectors to the power steering ECU assembly.

3. INSTALL POWER STEERING ECU PROTECTOR

   Click here

4. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

   Click here

5. INSTALL STEERING COLUMN ASSEMBLY

   Click here

6. TORQUE SENSOR ZERO POINT CALIBRATION

   Click here

7. ASSIST MAP WRITING

   Click here