PARKING BRAKE CABLE REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE PARKING BRAKE PEDAL SUB-ASSEMBLY (for LHD)

   (Click here)

2. Click here

   REMOVE PARKING BRAKE PEDAL SUB-ASSEMBLY (for RHD)

   (Click here)

3. Click here

   REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)

   
   
   1. 

      Pull up the parking brake pedal claw.

      Note:

      Do not damage the No. 1 parking brake cable assembly.

   2. 

      Remove the adjusting nut.

   3. 

      Remove the clip from the No. 1 parking brake cable assembly.

   4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

4. Click here

   REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)

   
   
   1. 

      Pull up the parking brake pedal claw.

      Note:

      Do not damage the No. 1 parking brake cable assembly.

   2. 

      Remove the adjusting nut.

   3. 

      Remove the clip from the No. 1 parking brake cable assembly.

   4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

5. Click here

   REMOVE REAR DOOR SCUFF PLATE LH

   Click here

6. Click here

   REMOVE CENTER PILLAR LOWER GARNISH LH

   Click here

7. Click here

   REMOVE FRONT DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side (Click here).

8. Click here

   REMOVE COWL SIDE TRIM BOARD RH

   Tip:

   Use the same procedure as for the LH side (Click here).

9. Click here

   REMOVE REAR DOOR SCUFF PLATE RH

   Click here

10. Click here

    REMOVE CENTER PILLAR LOWER GARNISH RH

    Click here

11. Click here

    REMOVE FRONT SEAT ASSEMBLY LH

    (Click here)

12. Click here

    REMOVE FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

13. Click here

    REMOVE AUDIO AMPLIFIER COVER

    Click here

14. Click here

    REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

    Click here

15. Click here

    REMOVE AUDIO AMPLIFIER COVER (w/ Telematics Transceiver)

    Click here

16. Click here

    REMOVE TELEMATICS TRANSCEIVER WITH MAYDAY BATTERY (w/ Telematics Transceiver)

    Click here

17. Click here

    REMOVE FLOOR CARPET HOOK

    Click here

18. Click here

    REMOVE FRONT FLOOR CAUTION PLATE COVER

    Click here

19. Click here

    REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET

    
    
    1. 

       Disengage the 2 clamps and separate the wire harness from the No. 2 console box mounting bracket.

    2. 

       Remove the 2 bolts and No. 2 console box mounting bracket.

20. Click here

    REMOVE NO. 4 CROSS MEMBER FLOOR REINFORCEMENT SUB-ASSEMBLY

    
    

    1. Turn back the floor carpet to a position where the No. 4 cross member floor reinforcement sub-assembly can be removed.

    2. 

       Remove the 8 bolts and No. 4 cross member floor reinforcement sub-assembly.

21. Click here

    REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY

    
    
    1. 

       Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

       Table 1. Text in Illustration

       *1	Parking Brake Equalizer
       *2	No. 2 Parking Brake Cable Assembly
       *3	No. 3 Parking Brake Cable Assembly
       *4	No. 4 Parking Brake Cable Assembly

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. 

       Slide the parking brake equalizer and rubber boot.

       Table 2. Text in Illustration

       *1	Rubber Boot
       *2	Parking Brake Equalizer
       *3	No. 4 Parking Brake Cable Assembly

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

22. Click here

    REMOVE FRONT EXHAUST PIPE ASSEMBLY

    (Click here)

23. Click here

    REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

    
    
    1. 

       Remove the 3 nuts and front No. 2 floor heat insulator.

24. Click here

    REMOVE PARKING BRAKE SHOE LEVER

    (Click here)

25. Click here

    REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)

    Click here

26. Click here

    REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)

    Click here

27. Click here

    REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

    
    
    1. 

       Remove the clip from the No. 3 parking brake cable assembly.

    2. 

       Remove the bolt and separate the No. 3 parking brake cable assembly.

    3. 

       Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

28. Click here

    REMOVE NO. 2 PARKING BRAKE CABLE CLAMP

    
    

    1. Remove the No. 2 parking brake cable clamp.