PARKING BRAKE CABLE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly, No. 3 parking brake cable assembly and No. 4 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.

PROCEDURE


  1. REMOVE PARKING BRAKE PEDAL SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A0006M2

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. A0008JW

      Remove the adjusting nut.

    3. A000996

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  3. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  4. REMOVE CENTER PILLAR LOWER GARNISH LH

    Click here

  5. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  6. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  7. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  8. REMOVE CENTER PILLAR LOWER GARNISH RH

    Click here

  9. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  10. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. REMOVE AUDIO AMPLIFIER COVER

    Click here

  12. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

    Click here

  13. REMOVE AUDIO AMPLIFIER COVER (w/ Telematics Transceiver)

    Click here

  14. REMOVE TELEMATICS TRANSCEIVER WITH MAYDAY BATTERY (w/ Telematics Transceiver)

    Click here

  15. REMOVE FLOOR CARPET HOOK

    Click here

  16. REMOVE FRONT FLOOR CAUTION PLATE COVER

    Click here

  17. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. A0003P0

      Disengage the 2 clamps and separate the wire harness from the No. 2 console box mounting bracket.

    2. A0004L1

      Remove the 2 bolts and No. 2 console box mounting bracket.

  18. REMOVE NO. 4 CROSS MEMBER FLOOR REINFORCEMENT SUB-ASSEMBLY


    1. Turn back the floor carpet to a position where the No. 4 cross member floor reinforcement sub-assembly can be removed.

    2. A0006QD

      Remove the 8 bolts and No. 4 cross member floor reinforcement sub-assembly.

  19. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A00054YE05
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. A0008OVE05
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  20. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  21. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A0006NB

      Remove the 3 nuts and front No. 2 floor heat insulator.

  22. REMOVE PARKING BRAKE SHOE LEVER

    Click here

  23. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)

    Click here

  24. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)

    Click here

  25. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A00091V

      Remove the clip from the No. 3 parking brake cable assembly.

    2. A0004YW

      Remove the bolt and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      A000577

  26. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp.