PARKING BRAKE PEDAL(for RHD) INSTALLATION

PROCEDURE

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

   
   

   1. 

      Install the parking brake control pedal assembly with the bolt and 2 nuts.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Tighten the bolt and 2 nuts in the order shown in the illustration.

   2. Connect the parking brake switch connector.

   3. 

      Install the No. 1 parking brake cable assembly with the bolt.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

   4. Install the clip to the No. 1 parking brake cable assembly.

   5. 

      Text in Illustration

      *1	Lock Nut
      *2	Adjusting Nut

      Temporarily install the lock nut.

      Tech Tips

      After adjusting parking brake pedal travel, tighten the lock nut.

2. CONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Turn
      *b	Hold

      Connect the No. 4 parking brake cable assembly to the parking brake control pedal assembly as shown in the illustration.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

3. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY

   Tech Tips

   Use the same procedure as for LHD Click here.

4. INSTALL STEERING INTERMEDIATE SHAFT ASSEMBLY

   Tech Tips

   Use the same procedure as for LHD Click here.

5. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

   Click here

6. INSTALL COMBINATION METER ASSEMBLY

   Tech Tips

   Use the same procedure as for LHD Click here.

7. INSTALL AIRBAG SENSOR ASSEMBLY

   Click here

8. INSTALL FLOOR CARPET BRACKET LH

   Click here

9. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

10. INSTALL SHIFT LEVER SUPPORT

    Tech Tips

    Use the same procedure as for LHD Click here.

11. INSTALL FRONT WHEEL RH

    Torque:

    103 N*m  { 1049 kgf*cm, 76 ft.*lbf }

12. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

13. ADJUST PARKING BRAKE PEDAL TRAVEL

    Click here

14. INSPECT BRAKE WARNING LIGHT

    Click here