PARKING BRAKE PEDAL(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL PARKING BRAKE PEDAL SUB-ASSEMBLY


    1. A0005C3E04

      Install the parking brake pedal sub-assembly with the bolt and 2 nuts.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Tighten the bolt and 2 nuts in the order shown in the illustration.

    2. Connect the parking brake switch assembly connector.

    3. Install the No. 1 parking brake cable assembly with the bolt and 2 nuts.

      Torque:
      Bolt
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }
      Nut
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Install the clip to the No. 1 parking brake cable assembly.

    5. Install the floor carpet.

    6. A000865E04
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Temporarily install the lock nut.

      Tech Tips

      After adjusting parking brake pedal travel, tighten the lock nut.

  2. CONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A00098LE05
      Text in Illustration
      *a Turn
      *b Hold

      Connect the No. 4 parking brake cable assembly to the parking brake pedal sub-assembly as shown in the illustration.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. INSTALL HYBRID VEHICLE CONTROL ECU ASSEMBLY

    Click here

  4. INSTALL AIRBAG SENSOR ASSEMBLY

    Click here

  5. INSTALL FLOOR CARPET BRACKET RH

    Click here

  6. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  7. INSTALL SHIFT LEVER SUPPORT

    Click here

  8. ADJUST PARKING BRAKE PEDAL TRAVEL

    Click here

  9. INSPECT BRAKE WARNING LIGHT

    Click here