BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

    Click here

  3. REMOVE HEADLIGHT LEVELING ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)

    Click here

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  6. REMOVE PUSH ROD PIN


    1. A0007UP

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL RETURN SPRING


    1. A0006GB

      Remove the brake pedal return spring from the brake pedal support assembly.

  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A0003WS

      Disengage the clamp.

    2. A0007YS

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A0004FJ

      Remove the 4 nuts and brake pedal support assembly.