Click here

ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1300

Click here
Click here Click here
DTC Code DTC Name
C1300 Skid Control ECU Malfunction
Click here

DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC No. INF Code DTC Detection Condition Trouble Area
C1300 - Skid control ECU (Brake booster with master cylinder assembly) internal malfunction. Skid control ECU (Brake booster with master cylinder assembly)
Click here

PROCEDURE


  1. Click here

    REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY


    1. Replace the skid control ECU (brake booster with master cylinder assembly) (See page for LHD orClick herefor RHD).

    2. Perform initialization and calibration of the linear solenoid valve (Click here).

    3. Perform zero point calibration of the yaw rate and acceleration sensor (Click here).

    4. Perform the sensor check in Test Mode Procedure (Click here).


    • NEXT

      END