Click here

TIRE PRESSURE WARNING SYSTEM, Diagnostic DTC:C2176/76

Click here
Click here
DTC Code DTC Name
C2176/76 Receiver Error
Click here

DESCRIPTION

Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No. DTC Detection Condition Trouble Area
C2176/76 Malfunction in the tire pressure warning ECU and receiver internal circuit Tire pressure warning ECU and receiver
Click here

CAUTION / NOTICE / HINT

Note:

  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.

  • It is necessary to perform initialization (See page ) after registration (Click here) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

Click here

PROCEDURE


  1. Click here

    CHECK DTC OUTPUT (C2176/76)


    1. Clear the DTCs (Click here).

    2. Turn the power switch off.

    3. Turn the power switch on (IG) and check for DTCs (Click here).

      OK
      DTC C2176/76 is not output.

    • OK

      END

    • NG

      REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER (Click here)