TIRE PRESSURE WARNING INITIATOR(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL REAR TIRE PRESSURE MONITOR INITIATOR

   
   

   1. Install the rear tire pressure monitor initiator with the 2 nuts.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

   2. Engage the grommet.

   3. Connect the connector.

2. INSTALL REAR WHEEL HOUSE LINER LH

3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

   Click here

4. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here