REAR STABILIZER BAR INSTALLATION

Info Added 2017-08-02

PROCEDURE


  1. INSTALL REAR STABILIZER BUSHING (for LH Side)


    1. A0004NNE01
      Text in Illustration
      *a Stopper Ring
      *b Cutout
      A0005GR Front of the Vehicle
      A0009JS Outside of the Vehicle

      Install the rear stabilizer bushing to the outside of the stopper ring on the rear stabilizer bar as shown in the illustration.

      Note

      Install the rear stabilizer bushing so that the cutout faces rearward.

  2. INSTALL REAR STABILIZER BUSHING (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  3. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)


    1. A0007O5

      Install the rear No. 1 stabilizer bar bracket to the rear stabilizer bar.

      Text in Illustration
      A0005GR Front of the Vehicle

      Note

      Be sure to install the rear No. 1 stabilizer bar bracket in the correct direction.

  4. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  5. INSTALL REAR NO. 2 STABILIZER BAR BRACKET (for LH Side)


    1. A0007W0

      Install the rear No. 2 stabilizer bar bracket to the rear stabilizer bar.

  6. INSTALL REAR NO. 2 STABILIZER BAR BRACKET (for RH Side)

    Tech Tips

    Perform the same procedure as the LH side.

  7. INSTALL REAR STABILIZER BAR


    1. A0009IN

      Install the rear stabilizer bar with the 4 nuts.

      Text in Illustration
      A0005GR Nut
      A0009JS Front of the Vehicle
      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  8. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    1. Install the rear stabilizer link assembly LH to the rear shock absorber with coil spring with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

    2. Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

  9. INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  10. INSTALL NO. 2 FLOOR UNDER COVER


    1. Install the No. 2 floor under cover with the 2 bolts, 3 nuts and 2 clips.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

  11. INSTALL NO. 1 FLOOR UNDER COVER


    1. Install the No. 1 floor under cover with the 2 bolts, 3 nuts and 2 clips.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

  12. INSTALL REAR WHEELS

    Torque:
    103 N*m  { 1049 kgf*cm, 76 ft.*lbf }