Click here

REAR STRUT ROD REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR WHEEL

  2. Click here

    REMOVE NO. 2 FLOOR UNDER COVER

    Click here

  3. Click here

    REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)

    Click here

  4. Click here

    SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01W4E6

      Remove the bolt and separate the No. 3 parking brake cable assembly from the vehicle.

  5. Click here

    REMOVE REAR STRUT ROD ASSEMBLY


    1. A01W2YDE07

      Support the rear axle carrier sub-assembly with a jack using a wooden block.

      Table 1. Text in Illustration
      *1 Jack
      *2 Wooden Block
    2. A01W0J8

      Remove the 2 bolts and separate the rear strut rod assembly (front).

    3. A01W19P

      Remove the bolt, nut and rear strut rod assembly from the rear axle carrier sub-assembly.

      Note:

      When removing the bolt, keep the nut from rotating.