REAR SEAT OUTER BELT ASSEMBLY INSPECTION

Click here Click here

PROCEDURE

1. Click here

   INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   
   
   1. 

      Before installing the rear seat 3 point type outer belt assembly LH, check the ELR function.

      Note:

      Do not disassemble the retractor.

      
      

      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

         Table 1. Text in Illustration

         *1	Retractor
         *a	Unlocked
         *b	Locked
         *c	45°

         If the result is not as specified, replace the rear seat 3 point type outer belt assembly LH.

2. Click here

   REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

   
   
   1. 

      Before installing the rear seat 3 point type outer belt assembly RH, check the ELR function.

      Note:

      Do not disassemble the retractor.

      
      

      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

         Table 2. Text in Illustration

         *1	Retractor
         *a	Unlocked
         *b	Locked
         *c	45°

         If the result is not as specified, replace the rear seat 3 point type outer belt assembly RH.