REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE

1. Click here

   INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

   Click here

2. Click here

   INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

   
   
   1. 

      Engage the guide to temporarily install the rear seat inner with center belt assembly LH.

   2. Install the rear seat inner with center belt assembly LH with the bolt <A> and bolt <B>.

      Bolt <A>
      7.5 N*m	76 kgf*cm	66 in.*lbf
      Bolt <B>
      42 N*m	428 kgf*cm	31 ft.*lbf

   3. Check if the ELR locks.

      Note:

      The check should be performed with the rear seat inner with center belt assembly LH installed.

      
      

      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

3. Click here

   INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

   Click here

4. Click here

   INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

   Click here

5. Click here

   INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

   Click here

6. Click here

   INSTALL REAR SEAT SHOULDER BELT HOLE COVER

   Click here

7. Click here

   INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

   Click here

8. Click here

   INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

9. Click here

   INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

   Click here

10. Click here

    CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    
    
    1. 

       Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.

       Table 1. Text in Illustration

       *1	Protruding Part

       42 N*m

       428 kgf*cm

       31 ft.*lbf

       Note:
       

       • Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.

       • Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.

11. Click here

    INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

12. Click here

    INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    
    
    1. 

       Install the rear seat inner with center belt assembly RH with the bolt.

       Table 2. Text in Illustration

       *1	Protruding Part

       42 N*m

       428 kgf*cm

       31 ft.*lbf

       Note:
       

       • Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.

       • Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.

13. Click here

    INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

    Click here

14. Click here

    CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

15. Click here

    CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

16. Click here

    INSTALL REAR SEAT SIDE GARNISH LH

    Click here

17. Click here

    INSTALL REAR SEAT SIDE GARNISH RH

    Click here

18. Click here

    INSTALL REAR DOOR SCUFF PLATE LH

    Click here

19. Click here

    INSTALL REAR DOOR SCUFF PLATE RH

    Click here

20. Click here

    INSTALL REAR SEAT ASSEMBLY

    (Click here)