REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    Click here

  2. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A01W1LPE04

      Engage the guide to temporarily install the rear seat inner with center belt assembly LH.

    2. Install the rear seat inner with center belt assembly LH with the bolt <A> and bolt <B>.

      Torque:
      Bolt <A>
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
      Bolt <B>
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    3. Check if the ELR locks.

      Note

      The check should be performed with the rear seat inner with center belt assembly LH installed.


      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

  4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

  5. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    Click here

  6. INSTALL REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  7. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

    Click here

  8. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  9. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Click here

  10. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A01W2ZYE01
      Text in Illustration
      *1 Protruding Part

      Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.

  11. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

  12. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. A01W5RAE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner with center belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.

  13. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

    Click here

  14. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  15. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

  16. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  17. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

  18. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  19. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  20. INSTALL REAR SEAT ASSEMBLY

    Click here