OCCUPANT DETECTION SENSOR INSTALLATION

PROCEDURE

1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

   
   

   1. 

      Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 16 new hog rings.

      Note

      
      

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

   2. 

      Using hog ring pliers, install 2 new hog rings.

      Note

      Be careful not to damage the cover.

2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

   Tech Tips

   Use the same procedures described for the LH side Click here.

3. INSTALL FRONT SEAT CUSHION SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

4. INSTALL RECLINING POWER SEAT SWITCH KNOB

   Tech Tips

   Use the same procedures described for the LH side Click here.

5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

   Tech Tips

   Use the same procedures described for the LH side Click here.

6. INSTALL FRONT POWER ADJUSTER SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

7. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

8. INSTALL FRONT SEAT INNER BELT ASSEMBLY

   Tech Tips

   Use the same procedures described for the LH side Click here.

9. INSTALL FRONT SEAT INNER CUSHION SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

10. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot Light)

    Tech Tips

    Use the same procedures described for the LH side Click here.

11. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot light)

    Tech Tips

    Use the same procedures described for the LH side Click here.

12. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedures described for the LH side Click here.