OCCUPANT DETECTION SENSOR REMOVAL

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY

   Tech Tips

   Use the same procedures described for the LH side Click here.

2. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot light)

   Tech Tips

   Use the same procedures described for the LH side Click here.

3. DISCONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot light)

   Tech Tips

   Use the same procedures described for the LH side Click here.

4. REMOVE FRONT SEAT INNER CUSHION SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

5. REMOVE FRONT SEAT INNER BELT ASSEMBLY

   Tech Tips

   Use the same procedures described for the LH side Click here.

6. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

7. REMOVE FRONT POWER ADJUSTER SHIELD

   Tech Tips

   Use the same procedures described for the LH side Click here.

8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

   Tech Tips

   Use the same procedures described for the LH side Click here.

9. REMOVE RECLINING POWER SEAT SWITCH KNOB

   Tech Tips

   Use the same procedures described for the LH side Click here.

10. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedures described for the LH side Click here.

11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedures described for the LH side Click here.

12. REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

    
    

    1. 

       Remove the 2 hog rings.

    2. 

       Remove the 16 hog rings and occupant detection sensor (separate type front seat cushion pad) from the separate type front seat cushion cover.