SEAT BELT WARNING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. Click here

   CUSTOMIZE SEAT BELT WARNING SYSTEM

   Tip:

   The following items can be customized.

   Note:
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   • These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch is on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning.

      5. Select the setting by referring to the table below.

         Table 1. Warning

         Display	Default	Content	Setting	Relevant ECU
         Driver Side Seatbelt Warning Buzzer	ON	Function to sound the driver seat belt warning buzzer	ON/OFF	Combination meter assembly
         Front Passenger Side Seatbelt Warning Buzzer	ON	Function to sound the front passenger seat belt warning buzzer	ON/OFF
         Rear Seatbelt Warning Buzzer*	ON	Function to sound the rear seat belt warning buzzer	ON/OFF

         
         

         • *: w/ Rear Seat Belt Warning

         Tip:

         This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.