REAR SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT CUSHION HEATER (BENCH TYPE REAR SEAT CUSHION COVER)


    1. A01W3Z7E01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Cushion Heater (Bench Type Rear Seat Cushion Cover))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 4 Always 4.82 to 5.89 Ω
      2 - 3 15 to 30 °C 6.1 to 13.3 kΩ

      If the result is not as specified, replace the rear seat cushion heater (bench type rear seat cushion cover).