FRONT SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    1. A0006OME04
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Cushion Heater (Separate Type Front Seat Cushion Cover))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      C-1 - A-3 Always Below 1 Ω
      C-2 - A-1 15 to 30 °C 6.1 to 13.3 kΩ
      C-2 - B-3 15 to 30 °C 6.1 to 13.3 kΩ
      C-2 - C-5 15 to 30 °C 6.1 to 13.3 kΩ
      C-3 - B-1 Always Below 1 Ω
      C-4 - A-2 Always Below 1 Ω
      B-2 - A-1 Always 3.52 to 4.30 Ω

      If the result is not as specified, replace the front seat cushion heater (separate type front seat cushion cover).