REAR SEATBACK HEATER REMOVAL

Click here

PROCEDURE

1. Click here

   PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing (Click here).

   Note:

   After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work (Click here).

2. Click here

   REMOVE LUGGAGE TRIM SERVICE HOLE COVER

   Click here

3. Click here

   DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the auxiliary battery negative (-) terminal to disable the SRS system.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

4. Click here

   REMOVE REAR SEAT HEADREST ASSEMBLY

5. Click here

   REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

6. Click here

   REMOVE REAR SEAT CUSHION ASSEMBLY

   Click here

7. Click here

   REMOVE REAR SEATBACK ASSEMBLY

   Click here

8. Click here

   REMOVE REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX

   Click here

9. Click here

   REMOVE REAR SEAT SHOULDER BELT GUIDE LH

   Click here

10. Click here

    REMOVE REAR SEAT SHOULDER BELT GUIDE RH

    Click here

11. Click here

    REMOVE REAR CENTER SEAT SHOULDER BELT GUIDE

    Click here

12. Click here

    REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)

    Click here

13. Click here

    REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)

    Click here

14. Click here

    REMOVE REAR SEATBACK HEATER SUB-ASSEMBLY (BENCH TYPE REAR SEATBACK COVER)

    Click here