SEAT HEATER SWITCH(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SUNSHADE SWITCH (COOLER CONTROL SWITCH ASSEMBLY)


    1. Check the rear sunshade switch.


      1. A01W2F8E03
        Text in Illustration
        *a

        Component without harness connected

        (Rear Sunshade Switch (Cooler Control Switch Assembly))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        12 - 16 Rear sunshade switch pushed Below 1 Ω
        12 - 16 Rear sunshade switch not pushed 10 kΩ or higher

        If the result is not as specified, replace the rear sunshade switch (cooler control switch assembly).