LUMBAR SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY (FOR DRIVER)


    1. Measure the resistance according to the value(s) in the table below.

      A0006R3E04
      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Hold Below 1 Ω
      4 - 5
      3 - 4 Off
      4 - 5
      2 - 5 Release
      3 - 4
      Text in Illustration
      *A for LHD *B for RHD
      *1 Release Switch *2 Hold Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly (for Driver))

      		 - -

      If the result is not as specified, replace the front power seat switch assembly (for driver).

  2. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY (FOR FRONT PASSENGER)


    1. Measure the resistance according to the value(s) in the table below.

      A00094FE04
      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Hold Below 1 Ω
      4 - 5
      3 - 4 Off
      4 - 5
      2 - 5 Release
      3 - 4
      Text in Illustration
      *A for LHD *B for RHD
      *1 Hold Switch *2 Release Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly (for Front Passenger))

      		 - -

      If the result is not as specified, replace the front power seat switch assembly (for front passenger).