REAR SEAT ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER


    1. Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.

    2. Using hog ring pliers, install 20 new hog rings.

      A0009LV

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    3. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 34 new hog rings.

      A00045Z

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL BENCH TYPE REAR SEATBACK COVER


    1. Temporarily install the bench type rear seatback cover to the bench type rear seatback pad.

    2. Using hog ring pliers, install 28 new hog rings.

      A0003R2

      Note


      • Be careful not to damage the bench type rear seatback cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    3. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 30 new hog rings.

      A0007RC

      Note


      • Be careful not to damage the bench type rear seatback cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  3. INSTALL REAR CENTER SEAT HEADREST SUPPORT


    1. A0008X3

      Engage the 4 claws to install the 2 rear center seat headrest supports.

  4. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)


    1. A000566

      Engage the 4 claws to install the 2 rear seat headrest supports.

  5. INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)


    1. A0004LD

      Engage the 4 claws to install the 2 rear seat headrest supports.

  6. INSTALL REAR CENTER SEAT SHOULDER BELT GUIDE


    1. A0007GV

      Engage the guide.

    2. Install the rear center seat shoulder belt guide with the 2 screws.

  7. INSTALL REAR SEAT SHOULDER BELT GUIDE LH


    1. A0009N4

      Engage the guide.

    2. Install the rear seat shoulder belt guide LH with the 2 screws.

  8. INSTALL REAR SEAT SHOULDER BELT GUIDE RH


    1. A00042Y

      Engage the guide.

    2. Install the rear seat shoulder belt guide RH with the 2 screws.

  9. INSTALL REAR SEAT WIRE (w/ Climate Control Seat System)


    1. A0004VP

      Engage the 3 clamps to install the rear seat wire.

    2. Connect the 2 connectors.

  10. INSTALL HEATER WIRE (w/ Climate Control Seat System)


    1. A00090L

      Engage the 2 clamps to install the 2 heater wires.

    2. Connect the 2 connectors.

  11. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Climate Control Seat System)

    Click here

  12. INSTALL REAR SEAT AIRBAG ASSEMBLY LH

    Click here

  13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL REAR CENTER SEAT ARMREST BOX


    1. A00077N

      Install the rear center seat armrest box to the rear center seat armrest pad as shown in the illustration.

    2. A0003RI

      Engage each hook to connect the rear center seat armrest cover sub-assembly to the rear center seat armrest box.

  15. INSTALL REAR CONSOLE BOX WIRE (w/ Climate Control Seat System)


    1. A00066H

      Engage the 3 clamps to install the rear console box wire.

  16. INSTALL REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY


    1. A0003JQ

      Insert the rear center seat armrest cup holder sub-assembly as shown in the illustration.

    2. Install the rear center seat armrest cup holder sub-assembly with the 3 screws.

  17. INSTALL REAR CENTER SEAT ARMREST BOX ASSEMBLY (w/o Climate Control Seat System)


    1. A0008B7

      Engage the 4 claws to install the rear center seat armrest box assembly.

  18. INSTALL COOLER CONTROL SWITCH ASSEMBLY (w/ Climate Control Seat System)

    Click here

  19. INSTALL REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY


    1. w/o Climate Control Seat System


      1. A00084D

        Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the rear center seat armrest box assembly.

      2. Install the screw.

    2. w/ Climate Control Seat System


      1. A0007F5

        Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the cooler control switch assembly.

      2. Install the screw.

  20. INSTALL CENTER ARMREST LOCK SUB-ASSEMBLY


    1. A0008C1

      Install the center armrest lock sub-assembly with the 4 screws.

  21. INSTALL ARMREST CONSOLE HINGE SUB-ASSEMBLY


    1. A0007X6

      Install the armrest console hinge sub-assembly with the 2 screws.

  22. INSTALL REAR NO. 1 CENTER SEAT ARMREST PLATE


    1. A000731

      Install the rear No. 1 center seat armrest plate with the 4 screws.

  23. INSTALL REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY


    1. A0006A9

      Engage the guide.

    2. Install the rear center seat armrest door sub-assembly with the 2 screws.

    3. Close the rear center seat armrest door sub-assembly as shown in the illustration.

  24. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY


    1. A0008D4

      Engage the hook to install the rear center seat armrest assembly to the rear seat armrest hole board sub-assembly.

  25. INSTALL REAR CENTER SEAT ARMREST HINGE


    1. A000705

      Engage the 2 guides.

    2. Install the rear center seat armrest hinge with the 2 bushes and 2 screws.

      Torque:
      4.6 N*m  { 47 kgf*cm, 41 in.*lbf }

  26. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX


    1. A00076H

      Engage the 2 claws.

    2. A000526E01
      Text in Illustration
      *1 Hook
      *2 Clamp

      Install the rear center seat armrest assembly with box with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. w/ Climate Control Seat System:


      1. Engage the 3 clamps.

    4. Engage the 2 hooks.