FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) CUSTOMIZE PARAMETERS

PROCEDURE

1. Click here

   CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)

   Tip:

   The following items can be customized.

   Note:
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Seat or Entry&Start.

      5. Select the setting by referring to the table below.

         Table 1. Seat

         Display	Default	Content	Setting	Relevant ECU
         Seat Move Distance	Standard	Allows customizing of the seat movement distance for the power easy access system.	OFF / Little / Standard	Main body ECU (multiplex network body ECU)

         Table 2. Entry&Start

         Display	Default	Content	Setting	Relevant ECU
         Seat position/Tilt & Telesco memory recall setting	D Door	This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system".	D Door / ANY Door	Certification ECU (smart key ECU assembly)

   2. Customizing with the multi-display (w/ Navigation System)

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Other vehicle settings.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Driver's seat easy exit	Full	Allows customizing of the seat movement distance for the power easy access system.	Off / Partial / Full	Main body ECU (multiplex network body ECU)

   3. Customizing using the combination meter assembly (w/o Navigation System)

      Tip:
      

      • Press and hold the DISP (steering pad switch assembly) when entering an item.

      • Briefly press the DISP (steering pad switch assembly) when selecting an item.

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings / Vehicle.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Driver's Seat Easy Exit	Full	Allows customizing of the seat movement distance for the power easy access system.	Off / Partial / Full	Main body ECU (multiplex network body ECU)