PTC HEATER ASSEMBLY INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL QUICK HEATER ASSEMBLY

   
   
   1. 

      Insert the quick heater assembly as shown in the illustration.

   2. Install the quick heater assembly with the 2 screws.

   3. Engage the 5 clamps.

   4. Connect the connector.

   5. Install the bolt.

      20 N*m

      199 kgf*cm

      14 ft.*lbf

2. Click here

   INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL SHIFT LEVER SUPPORT

   (Click here)

4. Click here

   INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

   (Click here)