ПЕРЕДНИЙ ПРИВОДНОЙ ВАЛ В СБОРЕ (для моделей с 1WW) РАЗБОРКА

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.


  1. DISCONNECT FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP LH


    1. A01IUD5

      Using needle-nose pliers, disconnect the front No. 2 axle inboard joint boot clamp LH as shown in the illustration.

  2. DISCONNECT FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. DISCONNECT FRONT AXLE INBOARD JOINT BOOT CLAMP LH


    1. A01INRE

      Using pliers, disconnect the front axle inboard joint boot clamp LH as shown in the illustration.

  4. DISCONNECT FRONT AXLE INBOARD JOINT BOOT CLAMP RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. DISCONNECT FRONT AXLE INBOARD JOINT BOOT


    1. Disconnect the front axle inboard joint boot.

  6. REMOVE FRONT DRIVE INBOARD JOINT LH


    1. Remove any old grease from the front drive inboard joint LH.

    2. A01ITV5E16
      Text in Illustration
      *a Matchmark

      Put matchmarks on the front drive inboard joint LH and front drive outboard joint shaft assembly LH.

      Note

      Do not use a punch to make the matchmarks.

    3. Remove the front drive inboard joint LH.

    4. A01ITM0

      Using a snap ring expander, remove the shaft snap ring.

    5. A01IN8NE02
      Text in Illustration
      *a Matchmark

      Put matchmarks on the front drive outboard joint shaft assembly LH and tripod joint.

      Note

      Do not use a punch to make the matchmarks.

    6. Using a brass bar and hammer, remove the tripod joint.

      Note

      Do not tap the rollers.

    7. Remove the front No. 2 axle inboard joint boot clamp LH, front axle inboard joint boot and front axle inboard joint boot clamp LH.

  7. REMOVE FRONT DRIVE INBOARD JOINT RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE FRONT DRIVE SHAFT DAMPER CLAMP LH


    1. A01IS08

      Using pliers, remove the front drive shaft damper clamp LH as shown in the illustration.

  9. REMOVE FRONT DRIVE SHAFT DAMPER LH


    1. Remove the front drive shaft damper LH.

  10. REMOVE FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP LH


    1. A01IO9L

      Using pliers, remove the front No. 2 axle outboard joint boot clamp LH as shown in the illustration.

  11. REMOVE FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE FRONT AXLE OUTBOARD JOINT BOOT CLAMP LH


    1. A01INJR

      Using pliers, remove the front axle outboard joint boot clamp LH as shown in the illustration.

  13. REMOVE FRONT AXLE OUTBOARD JOINT BOOT CLAMP RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE FRONT AXLE OUTBOARD JOINT BOOT


    1. Remove the front axle outboard joint boot.

    2. Remove any old grease from the front drive outboard joint shaft assembly LH.

  15. REMOVE FRONT DRIVE SHAFT DUST COVER LH


    1. A01IS2RE04

      Using SST and a press, remove the front drive shaft dust cover LH.

      SST
      09950-00020

      Note

      Be careful not to drop the front drive inboard joint LH.

  16. REMOVE FRONT DRIVE SHAFT DUST COVER RH

    Tech Tips

    Use the same procedure described for the LH side.