ПЕРВИЧНЫЙ ВАЛ РАЗБОРКА


  1. REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING


    1. A01IRE1

      Using a snap ring expander, remove the input shaft rear bearing shaft snap ring from the input shaft.

  2. REMOVE INPUT SHAFT REAR RADIAL BALL BEARING


    1. A01ITMHE01

      Using SST, remove the input shaft rear radial ball bearing from the input shaft.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011 )
      09631-20031

  3. REMOVE 6TH DRIVE GEAR


    1. A01INB8E01

      Using SST and a press, press out the 6th drive gear from the input shaft.

      SST
      09950-00020

  4. REMOVE 3RD DRIVE GEAR


    1. A01IR5QE01

      Using SST and a press, press out the 3rd drive gear from the input shaft.

      SST
      09950-00020
    2. A01IMXX

      Remove the spacer from the input shaft.

  5. REMOVE 4TH DRIVE GEAR


    1. A01ISFHE01

      Using SST and a press, press out the 4th drive gear from the input shaft.

      SST
      09950-00020

  6. REMOVE INPUT SHAFT SNAP RING


    1. A01IUQD

      Using 2 screwdrivers and a hammer, tap out the snap ring from the input shaft.

  7. REMOVE INPUT SHAFT FRONT BEARING


    1. A01IQ9RE01

      Using SST and a press, remove the front bearing from the input shaft.

      SST
      09950-00020