МЕХАНИЧЕСКАЯ ТРАНСМИССИЯ В СБОРЕ (кроме моделей с 1WW)) СНЯТИЕ


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine assembly with transaxle Click here.

  2. REMOVE REAR ENGINE MOUNTING INSULATOR


    1. A01IQL4

      Выверните 3 болта, отверните 2 гайки и снимите заднюю подушку опоры двигателя.

  3. REMOVE NO. 1 AIR TUBE


    1. A01IS5M

      Ослабьте хомут шланга.

    2. Выверните 2 болта и снимите воздушный патрубок № 1.

  4. REMOVE STARTER ASSEMBLY


    1. A01INZ3

      Disconnect the starter connector.

    2. Open the terminal cap, remove the nut and disconnect the starter wire.

    3. A01INO6

      Remove the 2 bolts and starter assembly.

  5. REMOVE AIR TUBE SUPPORT


    1. A01IT0E

      Remove the 2 bolts and air tube support.

  6. REMOVE ENGINE WIRE

    A01IP56

    1. Disconnect the back-up light switch connector, remove the 2 bolts, detach the 3 clamps and remove the engine wire from the manual transaxle.

  7. REMOVE OIL PAN INSULATOR


    1. A01IP2X

      Remove the 2 bolts and oil pan insulator.

  8. REMOVE STIFFENER PLATE LH


    1. A01IO7D

      Remove the 4 bolts and stiffener plate LH.

  9. REMOVE STIFFENER PLATE RH


    1. A01IRFC

      Remove the 4 bolts and stiffener plate RH.

  10. REMOVE MANUAL TRANSAXLE ASSEMBLY


    1. A01IS39

      Remove the 5 bolts and manual transaxle assembly from the engine.

  11. REMOVE ENGINE MOUNTING BRACKET LH


    1. A01IQ3R

      Remove the 4 bolts and engine mounting bracket LH.

  12. REMOVE FRONT ENGINE MOUNTING BRACKET


    1. A01IQ5X

      Remove the 3 bolts and front engine mounting bracket.

  13. REMOVE REAR ENGINE MOUNTING BRACKET


    1. A01IUP9

      Remove the 5 bolts and rear engine mounting bracket.