САЛЬНИК ДИФФЕРЕНЦИАЛА ЗАМЕНА


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  2. REMOVE TRANSAXLE CASE OIL SEAL LH


    1. A01IQELE01

      Using SST, remove the transaxle case oil seal LH.

      SST
      09308-00010

  3. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01IRHU

      Using an T50 "TORX" socket wrench, remove the 3 bolts and drive shaft bearing bracket.

  4. REMOVE TRANSAXLE CASE OIL SEAL RH


    1. A01ISBNE01

      Using SST, remove the transaxle case oil seal RH.

      SST
      09308-00010

  5. INSTALL TRANSAXLE CASE OIL SEAL LH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01ISB4E01

      Using SST and a hammer, tap in the transaxle case oil seal to the manual transaxle case.

      SST
      09950-70010   ( 09951-07200 )
      09608-32010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  6. INSTALL TRANSAXLE CASE OIL SEAL RH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01ITDSE01

      Using SST and a hammer, tap in the transaxle case oil seal RH to the front transaxle case.

      SST
      09950-70010   ( 09951-07200 )
      09649-17010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  7. INSTALL DRIVE SHAFT BEARING BRACKET


    1. Using a T50 "TORX" socket wrench, install the drive shaft bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 650 kgf*cm, 47 ft.*lbf }

  8. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  9. INSPECT FOR OIL LEAK