САЛЬНИК ДИФФЕРЕНЦИАЛА ЗАМЕНА


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    except 1WW:

    Click here

    for 1WW:

    Click here

  2. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01IP75

      Remove the 3 bolts and drive shaft bearing bracket.

  3. REMOVE TRANSAXLE CASE OIL SEAL LH


    1. A01IQELE01

      Using SST, remove the transaxle case oil seal LH.

      SST
      09308-00010

  4. REMOVE DRIVE SHAFT BEARING BRACKET

    except 1WW:

    Click here

    for 1WW:

    Click here

  5. REMOVE TRANSAXLE CASE OIL SEAL RH


    1. A01ISBNE01

      Using SST, remove the transaxle case oil seal RH.

      SST
      09308-00010

  6. INSTALL TRANSAXLE CASE OIL SEAL LH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01ISB4E01

      Using SST and a hammer, tap in the transaxle case oil seal to the manual transaxle case.

      SST
      09950-70010   ( 09951-07200 )
      09608-32010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  7. INSTALL TRANSAXLE CASE OIL SEAL RH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01ITDSE01

      Using SST and a hammer, tap in the transaxle case oil seal RH to the front transaxle case.

      SST
      09950-70010   ( 09951-07200 )
      09649-17010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Do not damage the oil seal lip.

  8. INSTALL DRIVE SHAFT BEARING BRACKET

    except 1WW:

    Click here

    for 1WW:

    Click here

  9. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    except 1WW:

    Click here

    for 1WW:

    Click here

  10. INSPECT FOR OIL LEAK