ВАЛ РЫЧАГА ВЫБОРА И ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ РАЗБОРКА


  1. REMOVE SELECTING BELLCRANK ASSEMBLY


    1. A01ITF6

      Remove the 2 bolts and selecting bellcrank from the manual transmission case.

  2. REMOVE CONTROL SHIFT LEVER BUSHING


    1. A01ITN4

      Remove the control shift lever bushing from the selecting bellcrank.

  3. REMOVE NO. 1 SELECTING BELLCRANK DUST COVER


    1. A01ITQY

      Remove the No. 1 selecting bellcrank dust cover from the selecting bellcrank.

  4. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY


    1. A01ISJKE02

      Using SST, remove the back-up light switch and gasket.

      SST
      09816-30010

  5. REMOVE NO. 1 LOCK BALL ASSEMBLY


    1. A01IURB

      Remove the No. 1 lock ball from the manual transmission case.

  6. REMOVE NO. 2 LOCK BALL ASSEMBLY


    1. A01IT5G

      Remove the No. 2 lock ball from the manual transmission case.

  7. REMOVE SHIFT GATE PIN


    1. A01IQF9

      Remove the shift gate pin from the manual transmission case.

  8. REMOVE SHIFT AND SELECT LEVER ASSEMBLY


    1. A01INE6

      Remove the 4 bolts and shift and select lever assembly from the manual transmission case.

  9. REMOVE INNER NO. 1 SHIFT LEVER


    1. A01IR2G

      Using a 5 mm pin punch and hammer, remove the slotted spring pin from the inner No. 1 shift lever.

    2. A01IU06

      Remove the inner No. 1 shift lever and shift interlock plate from the shift and select lever shaft.

  10. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A01IUD0

      Remove the control shaft cover and shift and select lever boot from the shift and select lever shaft.

  11. REMOVE SHIFT GATE PLATE


    1. A01IRJQ

      Remove the 2 bolts and shift gate plate from the inner No. 1 shift lever.

  12. REMOVE PIN


    1. A01ISGN

      Remove the 2 pins.

  13. REMOVE SHIFT LEVER DAMPER


    1. A01IUE3

      Remove the 2 bolts and shift lever damper from the shift and select lever shaft.

  14. REMOVE CONTROL SHAFT COVER OIL SEAL


    1. A01IQNO

      Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.