КОРПУС ДИФФЕРЕНЦИАЛА РАЗБОРКА

REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

1. 

   Using SST, remove the front differential case front tapered roller bearing from the front differential case.

   09950-00020
   09950-00030
   09950-40011	09957-04010
   09950-60010	09951-00560

   Table 1. Text in Illustration

   *a	Turn
   *b	Hold

REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

1. 

   Using SST, remove the front differential case rear tapered roller bearing from the rear differential case.

   09950-00020
   09950-00030
   09950-40011	09957-04010
   09950-60010	09951-00490

   Table 2. Text in Illustration

   *a	Turn
   *b	Hold

REMOVE FRONT DIFFERENTIAL RING GEAR

1. 

   Put matchmarks on the front differential ring gear and front differential case.

   Table 3. Text in Illustration

   *1

   Matchmark

2. 

   Remove the 16 bolts.

3. Using a plastic-faced hammer, remove the front differential case.

REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

1. 

   Using a 5 mm pin punch and hammer, tap out the front differential pinion shaft straight pin from the front differential case.

REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT

1. 

   Remove the No. 1 front differential pinion shaft from the front differential case.

REMOVE FRONT DIFFERENTIAL SIDE GEAR

1. 

   Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front differential side gear thrust washers from the front differential case.

   Tip:

   While rotating the front differential side gears, remove the 2 pinions and 2 pinion thrust washers.