МАСЛЯНЫЙ НАСОС ПОВТОРНАЯ СБОРКА


  1. INSTALL FRONT OIL PUMP OIL SEAL

    A01ISTIE01

    1. Using SST and a hammer, install a new oil seal to the oil pump body.

      SST
      09350-32014   ( 09351-32140 )
      Standard depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING

    A01ISQW

    1. Coat a new O-ring with ATF and install it to the oil pump body.

      Note

      Ensure that the O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR

    A01IRZ8

    1. Coat the front oil pump driven gear with ATF and install it to the oil pump body.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR

    A01IPOQ

    1. Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side up.

  5. INSTALL STATOR SHAFT ASSEMBLY

    A01INL5E02

    1. Align each knock pin of the stator shaft with the holes in the oil pump body and install the stator shaft to the oil pump body.

    2. Using a T30 "TORX" wrench, install the 16 bolts.

      Torque:
      9.3 N*m  { 95 kgf*cm, 82 in.*lbf }

      Tech Tips

      Each bolt length is indicated below.

      Bolt A: 14 mm (0.551 in.)

      Bolt B: 26 mm (1.02 in.)

  6. INSPECT FRONT OIL PUMP BODY AND GEAR SUB-ASSEMBLY

    A01IS7D

    1. Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.

      Note

      Be careful not to damage the lip of the oil seal.