САЛЬНИК ДИФФЕРЕНЦИАЛА ЗАМЕНА


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IRQL

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  2. REMOVE REAR ENGINE UNDER COVER LH


    1. A01INGO

      Снимите 5 фиксаторов и защиту картера.

  3. REMOVE REAR ENGINE UNDER COVER RH


    1. A01IQ51

      Снимите 5 фиксаторов и защиту картера.

  4. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the refill plug and gasket from the automatic transaxle.

    2. A01IN7E

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the automatic transaxle.

    3. A01IRC5E04

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle and drain the automatic transaxle fluid.

    4. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the automatic transaxle.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *3 Overflow Plug Hole

    5. Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the automatic transaxle.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

    6. Temporarily install the gasket and the refill plug to the automatic transaxle.

  5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Remove the front drive shaft LH and RH Click here.

  6. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01IP75

      Remove the 3 bolts and bearing bracket.

  7. REMOVE TRANSAXLE CASE OIL SEAL LH

    A01IPPZE04

    1. Using SST, tap out the transaxle case oil seal.

      SST
      09308-00010

  8. REMOVE TRANSAXLE CASE OIL SEAL RH

    A01IN6QE02

    1. Using SST, tap out the transaxle case oil seal.

      SST
      09308-00010

  9. INSTALL TRANSAXLE CASE OIL SEAL LH

    A01ISH2E02

    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      SST
      09316-10010
      09950-70010   ( 09951-07100 )
      Oil seal depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  10. INSTALL TRANSAXLE CASE OIL SEAL RH

    A01IROZE02

    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      SST
      09316-60011   ( 09316-00011 )
      Oil seal depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  11. INSTALL DRIVE SHAFT BEARING BRACKET


    1. Install the bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 650 kgf*cm, 47 ft.*lbf }

  12. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Install the front drive shaft LH and RH Click here.

  13. ADD AUTOMATIC TRANSAXLE FLUID


    1. Add automatic transaxle fluid Click here.

  14. INSTALL REAR ENGINE UNDER COVER RH


    1. Закрепите защиту картера 5 фиксаторами.

  15. INSTALL REAR ENGINE UNDER COVER LH


    1. Закрепите защиту картера 5 фиксаторами.

  16. INSTALL NO. 1 ENGINE UNDER COVER


    1. A01IRQL

      Install the No. 1 engine under cover with the 10 clips and 6 bolts.