МАСЛЯНЫЙ РАДИАТОР ДВИГАТЕЛЯ СНЯТИЕ


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap sub-assembly.

    2. A01IOM2

      Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

    3. Install a new gasket and the oil pan drain plug.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

  2. REMOVE INTAKE MANIFOLD

    Click here

  3. REMOVE OIL FILTER SUB-ASSEMBLY


    1. A01IRZU

      Using a 27 mm socket wrench, remove the oil filter cover.

    2. A01IT3NE01
      Text in Illustration
      *1 Oil Filter Sub-assembly
      *2 Oil Filter Cover
      *3 O-Ring

      Remove the 2 O-rings from the oil filter sub-assembly and the oil filter cover.

      Note

      Be sure to remove the O-ring by hand without using any tools to prevent damage to the O-ring groove.

    3. Remove the oil filter sub-assembly from the oil filter cover.

  4. REMOVE OIL FILTER ASSEMBLY


    1. A01IQ9N

      Remove the 6 bolts and oil filter assembly.

    2. A01ISKH

      Remove the gasket from the oil filter assembly.

  5. REMOVE OIL COOLER COVER SUB-ASSEMBLY


    1. A01IOCR

      Using a T8 "TORX" socket wrench, remove the 2 bolts and oil cooler cover sub-assembly from the oil filter assembly.

  6. REMOVE OIL CHECK VALVE SUB-ASSEMBLY


    1. A01IT0R

      Remove the 2 gaskets and 2 oil check valve sub-assemblies from the oil filter assembly.