ЭЛЕКТРОДВИГАТЕЛЬ ВЕНТИЛЯТОРА СИСТЕМЫ ОХЛАЖДЕНИЯ УСТАНОВКА


  1. INSTALL NO. 2 COOLING FAN MOTOR


    1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Attach the 5 wire harness clamps to connect the wire harness to the fan shroud.

  2. INSTALL COOLING FAN MOTOR


    1. Install the cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Attach the 3 wire harness clamps to connect the wire harness to the fan shroud.

  3. INSTALL NO. 2 FAN

    Note

    Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


    1. A01IR1X

      Install the No. 2 fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      The No. 2 fan has 11 blades.

  4. INSTALL FAN

    Note

    Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


    1. A01IRQC

      Install the fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      The fan has 7 blades.

  5. CHECK COOLING FAN MOTOR OPERATION

    Click here

  6. INSTALL FAN SHROUD

    Click here