ДАТЧИК ТЕМПЕРАТУРЫ ГАЗОВ РОГ УСТАНОВКА


  1. INSTALL EGR GAS TEMPERATURE SENSOR

    Note

    If the EGR gas temperature sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the EGR gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

    2. Connect the EGR gas temperature sensor connector and slide the white-colored lock to engage it securely.