ПЕРЕПУСКНОЙ РАСПРЕДЕЛИТЕЛЬНЫЙ КЛАПАН РОГ СНЯТИЕ


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Поднимите крышку двигателя № 1, чтобы освободить 4 фиксатора в порядке, показанном на рисунке, и снимите крышку двигателя № 1.

      Note

      Попытка одновременно освободить задние и передние фиксаторы может привести к повреждению крышки двигателя № 1.

  2. REMOVE EGR BYPASS VALVE SWITCHING VALVE ASSEMBLY


    1. A01IPR6E01
      Text in Illustration
      *a Spring Lock

      Disconnect the EGR bypass valve switching valve assembly connector.


      1. Pull the EGR bypass valve switching valve assembly connector off of the EGR bypass valve switching valve assembly while pushing down the spring lock of the EGR bypass valve switching valve assembly connector.

        Note

        If the EGR bypass valve switching valve assembly connector is disconnected without the spring lock being pushed down, the EGR bypass valve switching valve assembly connector may be damaged.

    2. Disconnect the 2 vacuum hoses.

    3. Detach the claw and remove the EGR bypass valve switching valve assembly.