ДАТЧИК ТЕМПЕРАТУРЫ ОТРАБОТАВШИХ ГАЗОВ (для датчика 2) СНЯТИЕ


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Поднимите крышку двигателя № 1, чтобы освободить 4 фиксатора в порядке, показанном на рисунке, и снимите крышку двигателя № 1.

      Note

      Попытка одновременно освободить задние и передние фиксаторы может привести к повреждению крышки двигателя № 1.

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

    Note

    If the exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A01IOUW

      Disconnect the exhaust gas temperature sensor connector.

    2. Disconnect the sensor harness from the bracket clamp.

    3. Disconnect the sensor harness from the hook on the cylinder head cover side.

    4. A01IQHT

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.